0 Members and 1 Guest are viewing this topic.


Gary Firth (Gazza)

Lift engine.
« on: Aug 25, 2018, 8:01 am »
Lift engine going in the eagle 4.

Nick Flint

Re: Lift engine.
« Reply #1 on: Aug 25, 2018, 10:14 am »
Have you omitted a video or photo?  :-[

Memories are BETTER than Dreams---"Capn" FLINT

Gary Firth (Gazza)

Re: Lift engine.
« Reply #2 on: Aug 26, 2018, 9:29 am »
Pushed the right buttons but no picture.

Gary Firth (Gazza)

Re: Lift engine.
« Reply #3 on: Aug 26, 2018, 9:30 am »
Pic

Gary Firth (Gazza)

Re: Lift engine.
« Reply #4 on: Aug 26, 2018, 9:32 am »
Removing the dash board with my airbags. (Nothing smutty intended).
Sharpened putty knife and a hammer helped.
Dash has to come out to fit engine. Will be pop riveting it back so itís easier if it ever has to come out.
Will redo the wiring to the instruments whilst itís on the bench (pool table).

Nick Flint

Re: Lift engine.
« Reply #5 on: Aug 26, 2018, 10:47 am »
"EEL level" made me giggle for too long.


Mirth in the Morning.
What ever next ::)
Memories are BETTER than Dreams---"Capn" FLINT

Gary Firth (Gazza)

Re: Lift engine.
« Reply #6 on: Aug 26, 2018, 1:35 pm »
Lining up for hole in the bulkhead.

Gary Firth (Gazza)

Re: Lift engine.
« Reply #7 on: Aug 26, 2018, 4:56 pm »
More pics.

Gary Firth (Gazza)

Re: Lift engine.
« Reply #8 on: Aug 26, 2018, 4:58 pm »
Another pic

Gary Firth (Gazza)

Re: Lift engine.
« Reply #9 on: Aug 26, 2018, 5:20 pm »
Just waiting for the 2 part bouancy foam. Then I can continue.

Eric Yeoman

Re: Lift engine.
« Reply #10 on: Aug 27, 2018, 2:04 am »
Hi, Gary,           what can you tell us about the 90* gearbox? Make, weight, cost, etc. Thanks.

Gary Firth (Gazza)

Re: Lift engine.
« Reply #11 on: Aug 31, 2018, 6:29 am »
Go to k and m products. Itís on there.
As for price I have no idea bought as a full kit of parts.

Gary Firth (Gazza)

Re: Lift engine.
« Reply #12 on: Aug 31, 2018, 6:30 am »
More jobs done. Splitter cut out   

Gary Firth (Gazza)

Re: Lift engine.
« Reply #13 on: Aug 31, 2018, 6:31 am »
Platter hole filled in.

Gary Firth (Gazza)

Re: Lift engine.
« Reply #14 on: Aug 31, 2018, 6:32 am »
Painted to make it neater.